Products Catalog

Specification

TECHNICAL INTRODUCTION
AQUAKEEPER is a super absorbent product of anionic polyacrylamide polymers which is cross-linked copolymers of acrylamide and potassium acrylate.

AQUAKEEPER is water/ fluid retainer that can be used in synergy with soil, fertilizer or other media as well to absorb and store water and nutrients in large quantities. Unlike other products, AQUAKEEPER does not dissolve in water, but it just absorbs and releases water and nutrients proportionally when needed by plants; thus, plants always have a supply of water and nutrients at any time since AQUAKEEPER functions to absorb and release water ( absorption – release cycles) .
AQUAKEEPER optimizes plant growth by reducing the loss of water and nutrients through leaching and evaporation. Water and nutrients are stored around the roots so as to optimize absorption by plants.

ADVANTAGES IN USING AQUAKEEPER
v Ensuring the availability of water throughout the year.
v Reducing water and nutrient loss caused by leaching, evaporation, and also reducing the frequency of watering and water consumption.
v Improving the physical properties of compact soils by forming good ventilation.
v Increasing plant growth because water and nutrients are always available around the plant for the optimal absorption by their roots.
v Reducing the mortality rate.
v Reducing environmental pollution from erosion and pollution of ground water.
AQUAKEEPER is polymer products that can be unraveled through decomposition by microbes so that this product is very safe to use. This polymer is sensitive to direct sunlight where it will break the polymer chains into several olygomers.
AQUAKEEPER will decompose naturally in the soil into CO2, H2O and nitrogen components.
It is important to note that AQUAKEEPER cannot substitute water but optimizes its use through a more efficient way.

APPLICATIONS
AQUAKEEPER can be applied in its dry form or after pre-hydrated ( soaked in water) . Soaking AQUAKEEPER, the dry polymer will absorb water as much as 200 times ( more or less) its weight for about 1 hour ago, then it can be applied as usual. For dry application, the product is used directly without soaking first. Once applied, it is then drenched with water so that the polymer absorb water. We can mix it with fertilizers and the planting medium ( compost, peat or other media) .
Dry application
AQUAKEEPER is scattered evenly in the prepared soil for planting with a depth of 10 to 30 cm. This method ensures the long-term benefits. After the polymer absorbs water, soil structure will improve and the ability of soil to hold water ( water retention capacity) will increase.
Pre-hydrated Application
AQUAKEEPER must first be soaked in water, as much as 100-200 times the weight of the polymer . Let it stand for 1 hour until saturated and then spread it into the prepared soil and cover it with soil so that polymer is not damaged by direct contact with ultraviolet light.
Recommended dosage is 5 - 20 kg/ ha.

APPLICATION TYPES
v Nursery
v Plantation/ agriculture
v Mixed with fertilizer
v Etc. Put on Product PartnerRecommend to your friends