Utilization of plastic waste disposal is an effort to suppress a minimum. And within certain limits save resources and reduce dependence on imported raw materials. Four types of waste plastics are popular and sell well in the market such as polyethylene ( PE ) , High Density Polyethylene ( HDPE ) , polypropylene ( PP ) and asoi .

Utilization of waste plastics can be done with reuse and recycle. Utilization of waste by means of recycling plastics is generally carried out by industry . In general, there are four ( 4 ) a requirement that plastic waste can be recycled by the industry, among other plastic waste must be in a particular form as needed ( pellets, powder, pieces ) , the waste must be homogeneous, has been cleaned with a high RPM speed so not contaminated, and sought not oxidized . To overcome these problems, before use of plastic waste is processed through the stages of separation by type, cutting, washing machine Rotary for removal of substances such as iron ( FeO ) .

Counting Machine of waste plastics or plastic mills MPLP 200, Capacity : 100-200kg/ jam, Dimensions ( LWH) : 110 x 80 x 150cm , Blade : 6 pieces knife @ 20cm , 2 pieces @ 45cm silent knife, 1 pieces fly wheel ( flywheel ) , Sieve hole 12mm, 20mm blade thickness, Material Steel knives and the tub Frame Material ( Mild Steel / MS ) 12mm thick .

Engine driving a Honda GX 390 [ 11 HP , Fuel Biogas Hybrid Premium ] with specs Horse Power : 11.0 HP , Engine Type : Single Cylinder , OHV 25 , 4 - Stroke , Air - Cooled , Oil Capacity : 1.1 Liters , Dimension ( L x W x H ) : 405 x 450 x 443 mm , total weight withplastic machine 81 kg delivery .